Asus Rt N12 Won T Reset



I tried Refresh/Reset from Troubleshoot, but they all said there is a problem and won't proceed. I download an recovery boot zip from someone share online (contains /boot /sources etc., incl. Install.Wim), format a Fat32 disk and extract all files, it does boot up (power + volume down), but after select language - Troubleshoot - reset/refresh. In order to reset the ASUS RT-N12 to its factory settings 1. Find the reset button on the rear of the router 2.

Here you can find the default IP address and the username and password for the user interface of the ASUS RT-N12HP Wireless-N300 3-in-1 router. This site also contains information about the preconfigured Wi-Fi settings of the device. In the bottom part of this website, you will find a manual for accessing the user interface of this router and resetting its factory settings.

  • ASUS RT-N12 access point help I am trying to setup an Ethernet connection far away from my original ASUS router (all 3 ASUS routers I’m using are RT-N12’s). So I have my original router connected to the network.
  • How to setup and reset ASUS RT-N10Setup:1: Go to 192.168.1.12: Authentication Required:need to log InUser Name:adminPassword:admin3:change the SSID'ASUS' in.

Login data for the user interface

192.168.1.1
admin
admin

Preconfigured Wi-Fi settings

ASUS
N12
<blank>

Access to the user interface

Accessing the user interface is necessary when you want to change the router configuration. For the ASUS RT-N12HP, you have to do the following steps for access:

  1. Switch on router
  2. Connect the device via Wi-Fi* or a network cable with the router
  3. Open web browser
  4. Enter IP address in the address bar and then confirm with ‘Enter’ key
  5. Enter username and password in the open interface and confirm once more

* Make sure that your router’s Wi-Fi is activated.

Reset default settings

Resetting default settings is especially helpful when you have changed and forgotten the login data for the user interface. Please consider that not only will settings like IP address, username and password be set to factory settings, but all configurations you may have made will as well.

Execute hardware reset

To reset the ASUS RT-N12HP to its default settings, you have to do the following steps:

  1. Turn on router
  2. For at least 6 seconds, press the Reset button
  3. Device is automatically restarted
  4. Router has been reset to factory settings

Execute software reset

With the ASUS RT-N12HP, you can restore the factory settings with the installed software. Log in to the user interface of the router with your access data and execute the steps that are described in the user handbook.

After you have successfully executed the steps mentioned above, the configuration of the router will be reset to factory settings. If you want to log in to the user interface, you have to use the preset login data.

Here you can find the default IP address and the username and password for the user interface of the ASUS RT-N12 D1 Wireless-N300 3-in-1 router. This site also contains information about the preconfigured Wi-Fi settings of the device. In the bottom part of this website, you will find a manual for accessing the user interface of this router and resetting its factory settings.

Login data for the user interface

192.168.1.1
admin
admin
Router

Preconfigured Wi-Fi settings

Asus rt n12 manual pdf
ASUS
<blank>

Access to the user interface

Reset

Accessing the user interface is necessary when you want to change the router configuration. For the ASUS RT-N12 D1, you have to do the following steps for access:

  1. Put router into operation
  2. Connect the device via Wi-Fi* or a network cable with the router
  3. Open web browser
  4. Enter IP address in the address bar and confirm with ‘Enter’ key
  5. Enter username and password in the open interface and confirm once more

* Make sure that your router’s Wi-Fi is activated.

Reset default settings

Resetting default settings is especially helpful when you have changed and forgotten the login data for the user interface. Please consider that not only will settings like IP address, username and password be set to factory settings, but all configurations you may have made will as well.

Execute hardware reset

To reset the ASUS RT-N12 D1 to its default settings, you have to do the following steps:

  1. Put router into operation
  2. Press Reset button for at least 6 seconds
  3. Restart of the device is automatically executed
  4. Default settings have been restored

Asus Rt N12 Router Manual

Execute software reset

Asus Rt N12 Router Password

With the ASUS RT-N12 D1, you can restore the factory settings with the installed software. Log in to the user interface of the router with your access data and execute the steps that are described in the user handbook.

Asus Rt N12 Access Point Setup

After you have successfully executed the steps mentioned above, the configuration of the router will be reset to factory settings. If you want to log in to the user interface, you have to use the preset login data.